3DPrinting

145 readers

1 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

founded 1 year ago

MODERATORS

jonmardyla@lemmy.world

j4k3@lemmy.world

What would do call this print quality issue, and how would you go about fix it? (beehaw.org)

submitted 1 year ago by John_Coomsumer to c/3dprinting@lemmy.world

5 comments fedilink hide all child comments

Halp

you are viewing a single comment's thread
view the rest of the comments

[–] Gormadt 2 points 1 year ago (1 children)

First some establing questions:

What are your settings?

What machine?

What kind of filament?

It looks like under extrusion but to properly diagnose it it will help to know the other info.

[–] John_Coomsumer 1 points 1 year ago

-Sovol Sv06 with upgraded cooling to a dual duct 5015

-hatchbox grey PLA

-settings are off the top of my head because the machine is in my office, but hotend 185 bed 70, ret dist .4, raft.

-otherwise the prints are coming out in great quality, no stringing. Did a temp tower and overhang before to dial in the new PLA.

-the machine sat turned off for a good month or so before swapping in the new PLA, so I might swap a new nozzle on and see if it improves.