Do It Yourself

7727 readers

1 users here now

Make it, Fix it, Renovate it, Rehabilitate it - as long as you’ve done some part of it yourself, share!

Especially for gardening related or specific do-it-yourself projects, see also the Nature and Gardening community. For more creative-minded projects, see also the Creative community.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

Gaywallet

alyaza

circularfish

Re-sealing shower surround (self.diy)

submitted 10 months ago by Vodulas to c/diy

19 comments fedilink hide all child comments

I am stripping and re-sealing a corner shower stall, and am having a hell of time removing all the old caulk. I also discovered the previous homeowners decided to just caulk over the previous caulk that was on there, so I am removing 2 or 3 layers depending on the location. It was leaking in the spots that had 3 layers so I think they just added more caulk to "fix" leaks. I have the chemical caulk remover, and that certainly helps, but it still is taking a metric fuck-ton of manual labor. Any tricks/suggestions for removal of very old caulk? I am about to throw a scotch brite on a palm sander and go to town.

you are viewing a single comment's thread
view the rest of the comments

[–] Seathru 3 points 10 months ago* (last edited 10 months ago) (1 children)

What's under the caulk? If it's ceramic tile, you can probably get away with a brass cup brush in a drill. Test in an inconspicuous area first obviously, but it should be less likely to scuff up the surface as something like scotchbrite.

[–] Vodulas 3 points 10 months ago (1 children)

It is a plastic surrounding, but nothing I would care about cosmetic damage.

[–] Seathru 3 points 10 months ago

Brass brush on a drill would probably melt into plastic fast. But a handheld one would work ok, or steel if you need more persuasion and aren't worried about scratches.