this post was submitted on 20 Jan 2024
477 points (100.0% liked)

Memes

1358 readers
34 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
 
top 40 comments
sorted by: hot top controversial new old
[–] Neato@ttrpg.network 74 points 9 months ago

A small blade safe can hold hundreds of blades and it's like 4"x3"x3". Makes sense they thought the inside of drywall 5'x3'x1' would be fine. It can probably hold tens of thousands. Even with a new blade daily that's decades. And when you tear down the wall you're dealing with Sheetrock, nails and screws already. All that time would have dulled the incredibly thin blades.

This is all to say: it seems wild but was a decent idea.

[–] manual3204@iusearchlinux.fyi 51 points 9 months ago

This was behind the medicine cabinet in my house.

[–] Drusas@kbin.social 32 points 9 months ago (1 children)

I think this is the first real TIL for me in ages.

[–] jol@discuss.tchncs.de 6 points 9 months ago

Congrats ☺️

[–] davel@lemmy.ml 31 points 9 months ago

Wall full of tetanus.

[–] 20inmyhead@lemmy.ml 28 points 9 months ago (1 children)

Remodeling contractors hate this one trick..

[–] JasonDJ@lemmy.zip 15 points 9 months ago (1 children)

How bad could it be? They’d all be piled up at the bottom of one stud cavity and you know they’re there. If you’re demoing the wall you’re gonna have gloves and a shop vac and a bigass broom and shovel anyway.

Still I got a little blade bank (about the size of those mini soda cans) on Amazon for $7 for my double-edge blades. Last year. And it still has plenty of room in it. Supposedly it holds 300 blades. That’s two blades a week for nearly 3 years. An absurd frequency…I replace my blade every week and I shave my head and they could totally go longer, they’re just so damn cheap.

[–] LittleBorat2@lemmy.ml 5 points 9 months ago

I think these plastic boxes the blades come in often have a slot for used blades on the bottom. They take up so little space without the paper around them that an entire pack fits into a 1mm slot maybe.

[–] SolNine@lemmy.ml 21 points 9 months ago (1 children)

Multiple homes I've lived in have had these slots in the medicine cabinets lol.

Did they anticipate people not living long enough to care? Or that some biome would form to use the blades as food?

Interesting decisions all around.

[–] Gladaed@feddit.de 3 points 9 months ago (1 children)

Prevents them from being mixes in with general garbage and people cutting themselves when handling such.

[–] SolNine@lemmy.ml 1 points 9 months ago

Makes sense!

[–] dan1101@lemm.ee 20 points 9 months ago

Yeah we had a 1920s house with a metal medicine cabinet above the sink. It had the razor blade slot and yeah they literally fell into the wall between the studs.

[–] MrFunnyMoustache@lemmy.ml 12 points 9 months ago

If I had this in my home, I would draw a face around this "mouth".

[–] Staiden@lemmy.dbzer0.com 9 points 9 months ago (1 children)

I still use safety razors. I get all excited when I'm at a bathroom that I can slip one in the wall.

[–] reverendz@lemmy.ml 7 points 9 months ago (1 children)

Safety razors are the best! They are cheap, you can buy a bunch of quality blades for pennies compared to a "Mach 3" or whatever.

Once you learn how to shave with one, there's no going back.

[–] Rodeo@lemmy.ca 3 points 9 months ago (4 children)

What's different about shaving with one as opposed to a regular disposable?

[–] Satiric_Weasel 3 points 9 months ago

They're much less irritating to your skin. Disposable razor commercials sold the world on the idea that more blades=closer and smoother shave; when in reality they can really tear up your face and leave razor bumps and ingrown hairs.

[–] Staiden@lemmy.dbzer0.com 1 points 9 months ago (1 children)

Just crazy cheap. I spent probably 5 dollars on shaving last year. That's using the most expensive blades made.

[–] averyminya 1 points 9 months ago

They also don't have plastic housings which is nice from a waste perspective

[–] reverendz@lemmy.ml 1 points 9 months ago

Cost! The cheap disposable blades are horrible to shave with. The good ones are crazy expensive.

Good quality safety razors are cheap! I bought a pack of blades and it’s lasted me literally years. It probably cost me $10-15 too.

load more comments (1 replies)
[–] OceanSoap@lemmy.ml 8 points 9 months ago (1 children)

Curious as to why this fell out of fashion?

[–] IHeartBadCode@kbin.social 10 points 9 months ago (1 children)

The used razor blades were arming the rats who were also in the wall.

[–] Hupf@feddit.de 2 points 9 months ago

狗娘养的 - Reavers!

[–] lapislazuli@sopuli.xyz 7 points 9 months ago* (last edited 9 months ago) (1 children)

Wet shaving is still very much a thing; in fact in the last decade or so, it's had a renaissance of sorts (tho it was probably re-gaining popularity already in the early 00's). I've been a wet shaver for 2.5 years but decided to buy me an electric shaver because these days I have less time for wet shaving. It can done be quickly but what's the point if you've got to rush it. Links for those who got curious:

https://www.badgerandblade.com/forum/

https://www.badgerandblade.com/forum/media/

https://sharpologist.com/

!wetshaving@sub.wetshaving.social

[–] barsoap@lemm.ee 11 points 9 months ago* (last edited 9 months ago) (2 children)

It can done be quickly but what’s the point if you’ve got to rush it

Yep a good shave needs time and most of all four passes: first with the grain, that's for the colleagues, second two at right angles to the grain, that's for your lover, and the fourth one against the grain, for personal satisfaction.

OTOH if you know what you're doing a quick and dirty shave is just as good as an electric one and you don't have to deal with batteries. If a short buzz cut is all you want do that.

The whole setup is a bit of a bother if you're new but basic guidelines:

  1. Shower. Well you don't 100% need to but dry skin and shaving don't mix well so do it before.
  2. A whisk and bowl, a cheap synthetic whisk is just fine the natural hair ones are a bugger to deal with anyway (have to take care to dry them properly etc), 5-10 bucks for the whisk, 25ct for the bowl in the euro store they came in a 4-pack, really tiny stainless ones. The rest I use for mise en place.
  3. Shaving cream/soap. Don't think you'll get away with using those self-foaming gels in a can they clog the razor, don't glide well, and I've never come across one that's nice to the skin. Comes in bar or tube form, some are better at gliding some smell better if you're lucky you get both, I'd put the palmolive shaving cream on #1 as "what to get when you don't know what you want": Glides very well, dirt cheap, forgiving when whisking, like a bit over a buck a tube.
  4. The actual foam: This is going to take some trial+error, you want extra water in it but don't make it a soup, you want fine bubbles and proper shaving cream/soap will make them have standing power (though if you're in a pinch you can use regular soap, no biggie). It should be nice and sloppy, with two 'c's. If in doubt, whisk more. Apply, then let soak, make coffee or something. Oh, some people don't use a bowl to whisk but do it directly on the skin. IMO they're madmen, it's like brewing tea in your mouth, but you do you.
  5. The razor. Lots could be said about geometry, about different comb sizes, ultra-fancy blade change mechanisms, long story short buy a Merkur 23C, 30-40 bucks, chrome-plated zinc and brass. Good weight, excellent general-purpose geometry, inexpensive, literally unchanged for a hundred years. You might be tempted to cheap out and get a Wilkinson they sell cheap plastic holders that take standard razor blades but trust me the only reason why they're selling them is to make people believe standard razor blades suck.
  6. The blades. Feather is the creme de la creme and might be just a bit too sharp for some, and also comparatively pricey. Russian manufacturers generally are good but given the situation let's boycott them, many western producers have spotty quality, that leaves BIC. Yes, the guys who also make lighters, ballpoint pens and surfboards. Bonus: Carton/wax paper packaging, if you re-wrap used blades and put them back in the carton you can toss them in the bin, no worries. How long a blade lasts depends on many factors, the biggest of which is your personal preference. But even if you buy feather blades and use a new one every day you'll still end up spending less money than using a cartridge system.
  7. Shaving: See the very top. Be aware of the grain, flip the razor over to wear the blades evenly, occasionally rinse it in the sink, you'll figure it out. Avoid being silly: Don't move the thing sideways over the skin that's how you cut yourself. The geometry of the razor will tell you the right angle, just let it lead. Always make sure there's good gliding going on, never tolerate resistance. Make funny faces to get skin into places where it's easier to shave, make it taught, etc. It's an ancient, secret art, traditionally transmitted from father to son, with a break in tradition you'll have to rediscover it for yourself.
  8. Cold (not ice cold) rinse. A very good way to wake up.
  9. Aftershave, a deeply personal matter. Generally speaking you want an astringent to stop any bleeding (also micro bleeds you can't see) and a disinfectant and something nice for the skin, my personal recipe is first alumina alum, rinse, then a bog-standard random face wash from the discounter, says aloe vera. The alum will burn worse than an aftershave with alcohol could ever burn but once you rinse it's over and I don't want to sit there with a slightly burning face for half the morning. As said: Deeply personal matter. Use whisky if you want I don't care.
[–] Randomgal@lemmy.ca 6 points 9 months ago (2 children)

That sounds like shaving with extra steps.

[–] barsoap@lemm.ee 2 points 9 months ago* (last edited 9 months ago)

You're completely right, I described shaving with the extra steps of figuring out what to buy and why to buy it as well as showering and making coffee. I even briefly touched on cooking.

[–] tigeruppercut@lemmy.zip 1 points 9 months ago* (last edited 9 months ago)

I mentioned this elsewhere but unless you have sensitive skin you should be able to use a safety razor pretty much like a 3 or 5 blade, ie without a ton of prep. Pretty much wet your face, apply cream (although I haven't tried it with the cheap foam stuff bc I stopped using those awhile ago), and go to town.

If you want to make it a whole thing it will probably get you a super close shave in the end, but if your goal is just to shave before work it should work fine in the same amount of time as the multi-blades. I've never had much luck with an electric-- I've got pretty thick hair and electrics inevitably pull at some of my hairs instead of cutting (I've never tried a high end electric though), so discovering safety razors was great for me.

[–] lapislazuli@sopuli.xyz 2 points 9 months ago* (last edited 9 months ago)

Thanks for sharing the instructions with folks here. As I said above, I've been a traditional wet shaver for two and a half years, so I pretty much know all this. However, wet shaving takes a lot of time for me and for various physical reasons and limitations, I cannot spend a long time shaving. I've learned how to speed up the process, but this means sloppier technique and it shows on my skin. At this point I want to give my skin a break by having a short stubble rather than going for BBS (that stands for BaBy Smooth) every single time. 😄 I don't mean to scare people away from traditional wet shaving, I'm just speaking for myself, who happens to have some motor function problems etc. If you're fairly "normal", there should be no reason not to try traditional wet shaving. It's a treat and something to look forward to every single time.

[–] berber@lemmy.chaos.berlin 6 points 9 months ago (1 children)
[–] lars@lemmy.sdf.org 5 points 9 months ago

I’ve totally been throwing ancient screenshots at almost-matching communities lately, including here, because I am trying get Lemmy some momentum – Lemmentum if you will – and be the change I want to see.

But yeah no meme here.

[–] Mycatiskai@lemmy.ca 6 points 9 months ago (1 children)

My dad's workplace had something similar in the 1960s-70s. It was a plane hangar that was used by the baggage handlers.

The walls were cinder block so hollow from top to bottom, they would open up the boxes of the mini alcohol bottles that would go on the planes and take handfuls of them out, once the bottles were empty they would dump them down the same hole until they actually filled one up then started on a new one.

That would have been a surprise when that hangar got demolished and that wall opened up.

[–] tocopherol@lemmy.dbzer0.com 3 points 9 months ago (1 children)

If they aren't going to recycle which rarely happens even today that is probably just as good of a solution as landfilling them, those little bottles are littered all over the earth. When they demolish a building they would trash all that debris anyway, but yeah a hilarious find, hundreds of them lol.

[–] Mycatiskai@lemmy.ca 3 points 9 months ago

Probably more like thousands. The building was high enough to fit a passenger plane. So the space in one cinder block hole would 6 in x 6 in by 60 ft high. That is a lot of mini bottles.

[–] MargotRobbie@lemm.ee 6 points 9 months ago

I thought people use those plastic blade disposal container that has a slot on top that you throw away once it gets full nowadays.

It's not built into the wall, but the base principle still hasn't changed even after all these times.

[–] maddruid 5 points 9 months ago

I've seen medicine cabinets in old houses with razor disposal slots in the back.

[–] DickFiasco@lemm.ee 4 points 9 months ago

Fuckin razor blades. Where do they go?

[–] OpenStars@startrek.website 4 points 9 months ago

Ngl, this sounds like the premise to a GREAT horror show, like American Horror Story. :-P

[–] wowwoweowza@lemmy.ml 3 points 9 months ago

Surely better than in your foot?