Do It Yourself

7733 readers

3 users here now

Make it, Fix it, Renovate it, Rehabilitate it - as long as you’ve done some part of it yourself, share!

Especially for gardening related or specific do-it-yourself projects, see also the Nature and Gardening community. For more creative-minded projects, see also the Creative community.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

Gaywallet

alyaza

circularfish

What's a good torque wrench to get? (lemmy.one)

submitted 1 year ago by Kurt@lemmy.one to c/diy

10 comments fedilink hide all child comments

cross-posted from: https://jorts.horse/users/fathermcgruder/statuses/110789232582943740

What's a good torque wrench to get?

I want to replace the spark plugs in my car and I'm apparently going to have to torque them to 30Nm. #diy #tools

@tools

you are viewing a single comment's thread
view the rest of the comments

[–] snowbell 1 points 1 year ago (1 children)

What would be a good beam style wrench on the inch pound scale?

[–] Seathru 2 points 1 year ago* (last edited 1 year ago)

It depends how precise you need to be. If a 10-15% margin of error is acceptable*, then most of the budget brands (Presa, Titan, Neiko, ect) will be fine. If you need <5% margin of error, start looking at the major brands (snap-on, blue point, matco, mac, cornwell) that come with calibration certificates.

How many inch pounds you are working with will determine the size you need.

1-100in/lb - 1/4" torque wrench
100-1000in/lb - 3/8" torque wrench
1000+in/lb - We really should be using a different unit at this point, but 1/2" torque wrench.

*For most shadetree repairs 10-15% is more than sufficient.

Edit: tried to fix formatting