Free and Open Source Software

17944 readers

4 users here now

If it's free and open source and it's also software, it can be discussed here. Subcommunity of Technology.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

Gaywallet

alyaza

StromAmpel: An application using an AZ-Delivery ESP8266MOD 12-F to display the current electricity mix for Germany in a traffic light kind of way (codeberg.org)

submitted 1 year ago* (last edited 1 year ago) by metacolon@lemmy.blahaj.zone to c/foss

10 comments fedilink hide all child comments

Inspired by this Mastodon account, I programmed an ESP8266 microcontroller to act as a traffic light, indicating the current electricity mix. Check it out on Codeberg! It uses an API from the Fraunhofer Institute and the parts cost around 5€. In my shared flat we use it as an indicator on when to run demanding devices, like the washing machine.

you are viewing a single comment's thread
view the rest of the comments

[–] metacolon@lemmy.blahaj.zone 4 points 1 year ago (1 children)

In my understanding a problem often is that electricity isn't used when renewable electricity sources can provide it. One solution to this is storing it, another (complementary) one is to adjust the usage to times when there is a lot of renewable energy available. This especially makes sense for big consumers (like factories), but a lot of washing machines also sum up to a lot of electricity demand. So we have to adjust to mainly use electricity when it's available via renewable sources, and this thing can hopefully help with that.

[–] Hirom 1 points 1 year ago* (last edited 1 year ago)

Automatic delay and time adjustment should be standard for consumer devices and electric car charging that consume lot of energy, and don't need to be activated immediately.

For years and even decades, it's been possible to setup water heaters to activate during low-rate electricity hours, and store the hot water for later.