this post was submitted on 02 Nov 2023
60 points (100.0% liked)
Science
13047 readers
1 users here now
Studies, research findings, and interesting tidbits from the ever-expanding scientific world.
Subcommunities on Beehaw:
Be sure to also check out these other Fediverse science communities:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Great proof of concept. This process alone isn't ready for widespread use yet due to the costs of the press and chemicals.
To enhance performance I would recommend experimenting with combinations of this material and the home epoxy/tarp process that some people have shown before. If some combo of those improvised materials can be squished down to about an inch thick, it starts to become practical for a modern armor plate. With refinements I bet there is a design that can reliably stop most handgun threats. Keep in mind his final proof of concept stopped 9mm out of a carbine length barrel which is a bit spicier than out of a pistol.
Another possible idea would be to coat the final plate in rhino-lining type truckbed coating, as this may prevent the spall and wood splintering from the front of the plate, and backface deformation... Both issues that threaten the armor wearer.