Technology

37725 readers

46 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

TheRtRevKaiser@kbin.social

743

Technology Connections talks about a red fridge from Walmart for an hour (youtu.be)

submitted 1 year ago by Rentlar to c/technology

206 comments fedilink hide all child comments

In a video by @Techconnectify@mas.to, Alec goes into a deep dive into the simplicity of his particular model, its shortcomings and variety of data logging tests in an attempt to fix them.

TL,DW: Very simple, cheap and ingenious design, with one compressor loop between the fridge and freezer in series. However, its temperature sensor is wonky and so the fridge is more affected by how long the compressor operates than the actual temperature itself. There is a signficant temperature differential between the top and bottom, fans on the exterior or interior could help but with the faulty sensor only made matters worse. With the controller replaced with a proper temp control unit the fridge functioned much better.

you are viewing a single comment's thread
view the rest of the comments

[–] FaceDeer@kbin.social 4 points 1 year ago

He actually might be wrong about the efficiency of the single-duct models, too. I read a counterargument that they actually work more efficiently than the dual-duct kind due to the fact that they're dumping heat into cooler indoor air to vent rather than trying to further heat up already-hot outdoor air. True, it causes some outdoor air to come inside in the process, but you're going to want some degree of air exchange anyway.

The newer systems for rating the efficacy of these units may ultimately account for all this. They basically make a mockup of a standard room and hot outdoor space, run the unit in it for a period of time, and then measure how much electricity was used to cool the interior by X degrees. Ultimately that's all that really matters - how much electricity gets turned into how much of a drop in indoor temperature.