Technology

37735 readers

49 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

TheRtRevKaiser@kbin.social

I’m curious about building a laptop but am getting hung up on motherboards (self.technology)

submitted 9 months ago by megopie to c/technology

23 comments fedilink hide all child comments

I’m aware of things like framework and they’re a cool system, but they’re limited in what chipsets can be used by the mother boards they offer.

I’m thinking in the context of a cheap low spec system that can be handed out for use by a group. Most of the options available are just very pricy.

Maybe something like a SBC would be a better fit since there are plenty of cheap options out there and they can be mounted in a custom built shell with the other needed elements.

A thought that crossed my mind was ordering printed circuit board and just soldering on the sockets and the like, but that’s a very involved process with a lot that could go wrong. Especially for someone with very little experience.

Short of custom ordering from a company that does such things, are there any systems for building a mother board?

This is more out of curiosity about what options there are out there. Any other thoughts people have about custom built laptops or interesting things in that space?

you are viewing a single comment's thread
view the rest of the comments

[–] megopie 3 points 9 months ago (2 children)

See, I knew about PCB way and was wondering if their products would even really work. Or if the sockets for the chips would be available for small batch stuff.

[–] Doombot1@lemmy.one 6 points 9 months ago

Even if you were able to make your own PCB and somehow solder everything onto it, one of the things that makes complex boards like motherboards so tough to make is signal path lengths. Ever see how some of the traces on motherboards are squiggly and take up more space than the straight ones? That isn’t just for fun - all of the traces have to be incredibly specific lengths for a whole number of reasons, including signal timing and interference with other traces.

[–] jarfil 3 points 9 months ago

"Sockets for the chips" are the least of the problems, most chips don't use sockets at all, they instead get soldered to a board through BGAs. Even multi-chip boards like CPUs, usually get soldered through BGAs. Then, what you need to think about is what kind of boards you want to connect and how.

If you wanted to make something low spec, you might look at the Raspberry Pi Compute Module, that only needs a sort of "breakout board", where you could place a bunch of M.2 connectors for daughter boards... but chances are you will be really hard pressed to make a whole laptop that's cheaper than a much higher spec brand one.