Homelab

22 readers

1 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis@communick.news

How should I handle OS storage without disks? (alien.top)

submitted 11 months ago by JoaGamo@alien.top to c/homelab@selfhosted.forum

11 comments fedilink hide all child comments

As i'm at a point of increasing my actual 4 server count, how should I handle storing the OS of each server?

Problem: I have no money and I'm looking for a way to buy more servers without buying and taking care of new boot ssds.

The actual setup is that each server has their own 120/240gb ssd to boot from, and one of my servers is a NAS.

at first I thought of PXE persistent boot, but how would I assign each machine their own image is one of the problems..

I've found this post talking about Disk-less persistent PXE, but it's 5 years old, it talks about SAN booting, but most people I've seen in this sub are against fiber-channel protocol, probably there's a better way?

Without mentioning speed requirements (like a full-flash NAS or 10+gbit), Is it possible to add more servers, without purchasing a dedicated boot device for each one?

you are viewing a single comment's thread
view the rest of the comments

[–] AceBlade258@alien.top 1 points 11 months ago

The servers use their built-in NIC's PXE to load iPXE (I still haven't yet figured out how to flash iPXE to a NIC), and then iPXE loads a boot script that boots from NFS.

Here is the most up-to-date version of the guide I used to learn how to NFS boot: https://www.server-world.info/en/note?os=CentOS_Stream_9&p=pxe&f=5 - this guide is for CentOS, so you will probably need to do a little more digging to find one for Debian (which is what Proxmox is built on).

iPXE is the another component: https://ipxe.org/

It's worth pointing out that this was a steep learning curve for me, but I found it super worth it in the end. I have a pair of redundant identical servers that act as the "core" of my homelab, and everything else stores its shit on them.