3D Printing

242 readers

2 users here now

For everyhting 3D printing related.

Please be excellent to each other :)

Icon by Freepik, Banner photo by Thiago Medeiros Araujo

founded 4 years ago

MODERATORS

3dnudel@lemmy.ml

Quality of 3D printing versus injection molding (lemmy.ml)

submitted 1 year ago by citytree@lemmy.ml to c/3dprinting@lemmy.ml

11 comments fedilink hide all child comments

Are consumer level 3D printers able to print plastic objects of similar quality to ones produced using injection molding? Or is 3D printing useful mostly for the prototyping stage before a design is finalized and a steel mold is produced for injection molding?

you are viewing a single comment's thread
view the rest of the comments

[–] Lampenoel@feddit.de 5 points 1 year ago (4 children)

It depends on how you define quality.

If you define it by general shape and tolerances, 3d printing can(!) achieve a comparable quality.
if you define it by it's surface finish, SLA prints can but it's nearly impossible with FDM (at least currently).
and if you define it, by its tensile strength or mechanical properties injection molded pieces wil probably always have an edge over 3d prints because of their anisotropic behaviour (meaning the piece can endure forces differently depending on the direction)

And of course as already mentioned injection molding is a much better fit for mass production.

[–] JohnEdwa@sopuli.xyz 4 points 1 year ago* (last edited 1 year ago)

And on the commercial side you have SLS. It can make parts that are accurate like SLA but made out of nylon so they are also really strong - that's for example how most parts by bondtech are made.

Not quite in the consumer pricepoint yet, but maybe in a few years.

[–] Keesrif 3 points 1 year ago* (last edited 1 year ago) (1 children)

I agree with all your points, except the last one. Admittedly, it is still rare, but there are companies out there that, using industrial machines, manage to get close to or (in case of the linked one) exceed injection moulding in tensile strength, and are achieving near isotropy using FDM processes. https://orion-am.com/blog/orion-am-news-1/3d-printing-peek-stronger-than-injection-molding-12

Disclaimer: I work there. However, this article has independent test data that has been verified by 3 different labs by now.

[–] Lampenoel@feddit.de 2 points 1 year ago (1 children)

I guess there's always something new to learn. But while it's tested with PEEK (and other high performance thermosplastics) I am curios if it works with more customer-grade materials like PET(G), ASA, PLA or PS, since those have a far lower melting range compared to PEEK. Also most users are probably not willing to pay the price of PEEK or other high performance materials. Nevertheless its a really interesting method i wasn't aware of yet, maybe it will become the new standard for industrial FDM in a few years. Thanks for sharing!

[–] Keesrif 2 points 1 year ago

There's no data on those, but we did at some point print air tight (0.8 bar over a week iirc, no vapour smoothing) in abs, so it may be similar. Consumer grade hardware of this sort is probably still pretty far away, but it's not as impossible as many believe :)a

[–] Ruthalas@infosec.pub 2 points 1 year ago

This is very good information.

To add another point, a few other differences: -Additive manufacturing (3d printing) can produce some shapes which are not possible using injection molding -Injection molding currently has access to a wider variety of materials due to its maturity (pelletized raw material)

[–] zwerdlds@lemmy.ml 2 points 1 year ago (1 children)

nearly impossible with FDM

I'm not in the space, but what's your opinion of acetone vapor treatments to get a bit higher polish for fdm?

[–] Lampenoel@feddit.de 1 points 1 year ago

I haven't tried it myself yet but from the results I've seen online it seems like a good way to decrease roughness. But you still you have to print with a low layer height since larger layers result in deeper crevices which can't be mitigated by the vapor. And its nothing I would try without proper safety measures. Of course you can also sand and polish your surfaces by hand but especially larger surfaces get really tedious really quick :D